Looking for:
Logic pro x version history free. Logic Pro release notes |
Logic Pro - Wikipedia
Download Buy Now. What's New? Expand all Collapse all. Version 9. By default, this value is Pro Edition and 16 Free Version. This parameter can be set to a maximum value of A custom test definition consists of an existing test algorithm, specific test pattern, cache settings, and number of iterations. Thinkpad Fixed artifacts appearing in icons due to improper handling of transparency channel Restored option to set of passes for Free version Fixed drawing issues in Upgrade to Pro screen when hovering mouse over sidebar Fixed display issues in console mode for certain boards eg.
This information is logged in the log file. Version 8. If enabled, will perform a comparison of the values contained in SPD. Errors with the same address and bits but occur in different tests are no longer considered to be duplicate. This allows for systems without graphics support eg. Added support for memory error triggering and logging for logic analyzers such as Logic Analyzer Keysight UA.
Before the test is started, the memory address of the structure where errors are logged is displayed on screen to allow for configuration of the logic analyzer. Version 7. If so, the tests are aborted.
On the first pass, the default step size is 0x 64MB Reduced test time of the row hammer test Test 13 by using only a single offset bit to determine the row address pair, rather than cycle through all possible offset bits. Increasing the step size reduces the memory test coverage, but will also decrease the test time.
By default, the step size is 0x 16MB Added several known baseboards to a 'blacklist' of boards that have known issues when running in multiprocessor mode. If a blacklisted baseboard is detected, the Multiprocessor test is skipped during startup and the CPU selection mode is set to single. Previously, this caused invalid bytes to appear in the SPD data.
Report files can also be uploaded to the server. Logging, however, is unavailable. Running in parallel mode significantly decreases the test time as compared to running in single CPU mode and should also help to detect more errors faster. By default, random data patterns are used. By default, double-sided hammering is used. Version 6. If errors are detected in the second pass, they are reported as normal.
If errors are detected in the first pass but not the second pass, a warning of potential high frequency bit flips is displayed to the user. Although errors detected in this test are real errors, the conditions needed to induce these errors occur only very rarely in normal PC usage, and should not be of concern to most users.
Therefore, a warning rather than an outright failure would ensure the user is aware of the issue and be able to take the necessary measures to mitigate the issue. This parameter represents the maximum number of warnings to display in the report file. Enabling this parameter shall result in the following: Splash screen is skipped and the tests are started immediately When the tests are completed, the report is saved to disk automatically System is rebooted.
New RAM benchmarking feature allowing results to be graphed and saved to disk. Previous results can be graphed on the same chart for comparison. New "Hammer Test" for detecting disturbance errors caused by charge leakage when repeatedly accessing addresses in the same memory bank but different rows in a short period of time. All text are displayed in the selected language, including generated reports. Version 5. On older systems a keyboard is still required. Improved USB keyboard support.
So Mac USB keyboards are now supported. Improved multi-threading support, where supported by the underlying UEFI system. Timings, clock speeds, vendor names and much more. Support to writing to the USB drive that Memtest is running from for logging and report generation.
In all prior MemTest releases there was no disk support. Use of GPT. This can help with automation. This is the result more moving to native 64bit code, removing the PAE paging hack, switching compilers and using faster random number generation algorithms. Addition of 2 new memory tests to take advantage of 64bit data and SIMD instructions. Version 4. Added menu option for enabling serial console mode. Added a check to perform a spin lock only when more than 1 CPUs are detected.
The MP spec table has largely been deprecated. This will lower the reported bandwidth for multi-core machines. But we think it makes more sense this way. Fixed crash when attempting to boot on older single core machines with hyperthreading. Restored the "Start only one CPU" boot option. This option should not be required in normal use, but might be useful for debugging purposes.
Updates to the included help file. This bug could have resulted in false errors being reported in Test 6. The false errors were rare in normal use, but could be provoked more easily by running the tests out of order. Removed unnecessary boot options in menu. Running all CPUs at once has been shown to cause false positives on a number of systems.
Fixed a bug that could cause the program to go into a tight loop that could not be escaped when setting certain memory ranges to test. Fixed a bug displaying the memory location of individual errors.
The values after the decimal point in the MB readout were incorrect. Fixed a bug in configuring upper and lower memory limits, previously lower limits equal or grater than 2gb would not work, as well as some other more obsucre configurations. Added a misc option to display the systems memory map.
Fixed a bug that would cause the number of passes to not correctly reset after changing the selected tests. Added missing source code to some of the download packages. Fixed a bug in test 8 causing a single error to cascade into multiple errors. Fixed a bug causing the average error bits to be incorrect once the errors had maxed out at 65k Fixeda bug preventing test 10 to be selected as a single test to run.
Fixed bug displaying individual test error counts. Fixed bug making overall errors 10x what they should be. The USB keyboard functionality is memory mapped into a portion of low memory on some maybe many machines, typing on a USB keyboard changes some values in RAM as the key presses are stored in memory as you type.
This can cause the keyboard to become unresponsive during testing or input from the keyboard to generate errors in the tests. Fixed crash when configuring memory ranges. Changing the meory range during the first test, or changing the memory range multiple times during later tests could cause the current test number to become negative, triggering a crash. Fixed highest error address not reporting correctly on error.
Fixed error counters overflowing and reseting to 0 after too many errors. Fixed max contiguous error reporting. Cleaned up some UI text. A large number of trace points have been added in key portions of the code in particular SMP startup routines to provide visibility of obscure failures.
This feature will allow non-technical users to provide troubleshooting data for better test stability. Added a new One Pass feature. This feature runs the complete test once and then exits, but only if there were no errors. This provides a convenient method for unattended testing. One Pass may be enabled via a boot option or via an on-line command.
The new boot time options may be specified at the boot prompt. A feature has been added to allow customization of the list of tests to be run.
The test list may be specified via a boot option or via an on-line command. A feature has been added to restrict specific CPUs that are to be used for testing. These are enabled with boot options. A number of problem with use of on-line commands when testing with more than one CPU have been fixed. A selection of boot time parameters are were added. Improved and extended CPU identification routines. Routines for calculating cache and memory speeds have been reworked for better accuracy.
An overflow problem has been fixed that resulted in no memory speed being reported for CPUs with large L3 caches.
No comments:
Post a Comment